Welcome to visit Cangzhou HENGJIA Pipeline Co., ltd.. Welcome customers to our company to negotiate business!
Current location:Home > News > Common problemText content

Problems of ERW Steel Pipe

 because the primary process is in a hot state , so the heating operation is resolution product quality is very important process.
The heat with the furnace, according to their results, and reheating furnace is divided into two kinds; the former is used to billet heated from room temperature to the processing temperature; the latter is used in the process of the blank reheated to the required processing temperature.
Heating will be wrong in the outer surface of the tube surface,It may exhibit cracks, folds and migraine pain and other waste reason.
The primary use is a ring furnace. This furnace has an annular hearth, it can slowly change the direction of the diameter of the blank along the bottom of the load from the entrance,Dn15-- Dn200 Hot Rolled ERW Steel Pipe can be used at the outlet of the heating and soaking temperature to the rule kind of stove. This operation of the key blank is heated uniformly to a temperature suitable for processing. Because a great impact on the quality of the perforation, that is, when the temperature of the process piercing is an important condition affecting the quality, The temperature of the billet piercing working is generally to manipulate.
Click times:14Release time:2/21/2018 【Print】【Close
Previous:How does the blind flange connect
Next:No
Share to: